Filter
Top Products
Chapter 5: Using DeviceInstaller
XPress DR+ User Guide 43
Table 5-1. Viewing Current Settings
Setting Description
Name
Configurable field. A name that identifies the XPress DR+.
Double-click the field, type in the value, and press Enter to
complete. This name is not visible on other PCs or laptops
using DeviceInstaller.
Group
Configurable field. A group name to categorize the XPress
DR+. Double-click the field, type in the value, and press Enter
to complete. This group name is not visible on other PCs or
laptops using DeviceInstaller.
Comments
Configurable field. Information about the XPress DR+. Double-
click the field, type in the value, and press Enter to complete.
This description or comment is not visible on other PCs or
laptops using DeviceInstaller.
Device Family
Non-configurable field. Displays the unit’s device family type
as XPress.
Type Non-configurable field. Displays the device type as XPress
DR+.
ID
Non-configurable field. Displays the unit's ID embedded within
the box.
Hardware Address
Non-configurable field. Displays the unit's hardware (or MAC)
address.
Firmware Version
Non-configurable field. Displays the firmware currently
installed on the XPress DR+.
Extended Firmware
Version
Non-configurable field. Displays the
full version
nomenclature of the firmware.
Online Status
Non-configurable field. Displays the unit's status as online,
offline, unreachable (the XPress DR+ is on a different subnet),
or busy (the XPress DR+ is currently performing a task).
Telnet Enabled Non-configurable field. Displays True. Permits Telnet
sessions.
Telnet Port
Non-configurable field. Displays the unit's port for telnet
sessions.
Web Enabled Non-configurable field. Displays True. Permits configuration
through Web Manager.
Web Port
Non-configurable field. Displays the unit's port for Web
Manager configuration.
Maximum Baud Rate
Supported
Non-configurable field. Displays the unit's maximum baud
rate. Note: The XPress DR+ may not be running at this rate
currently.
Firmware Upgradeable Non-configurable field. Displays True, indicating the unit's
firmware is upgradeable as newer versions become available.
IP Address
Non-configurable field. Displays the unit's current IP address.
To change the IP address, see Assigning an IP Address on
page 41.
Number of COB
partitions supported
Non-configurable field. Displays the number of COB partitions
supported.