Filter
Top Products
Chapter 6: Configuration Using Web Manager
XPress DR+ User Guide 51
Retry Settings
Retry Counter
Enter the value for the number of times the XPress DR+
should attempt to retry connecting to the host list. The default
setting is 3.
Retry Timeout
Enter the duration (in seconds) the XPress DR+ should
abandon attempting a connection to the host list. The default
setting is 250.
Host Information
Host Address
Enter or modify the host’s IP address.
Port
Enter the target port number.
3. When finished, click the OK button.
4. To save and reboot, click Apply Settings on the main menu.
Channel Configuration
The Channel 1 and Channel 2 configurations define how the serial ports respond to
network and serial communication.
Note: Channel 1 and Channel 2 have the same defaults except for the port number
(10001 for Channel 1 and 10002 for Channel 2). The procedures below are for Channel
1; they are the same for Channel 2.
Serial Settings
To configure the channel’s serial settings:
1. On the main menu, click Serial Settings (below Channel 1) to display the Serial
Settings window.