Filter
Top Products
15: Services Settings
xSenso User Guide 82
To Configure RSS Settings
Using Web Manager
To configure RSS, go to the Admin tab/page and click RSS in the menu.
Using the CLI
To enter the RSS command level: enable -> config -> rss
Using XML
Include in your file: <configgroup name=”rss”>
SNMP Settings
Simple Network management Protocol (SNMP) settings may be viewed and configured in this
section.
Table 15-7 SNMP Settings
Clear Click the button to clear RSS feed data.
RSS Settings Description
State Select to enable or disable the SNMP agent state.
Version Select the SNMP version used by the SNMP agent.
Read Community Specify the read community used by the agent (defaults to public community).
Write Community Specify the write community used by the agent (defaults to private community).
Engine ID Show SNMPv3 Engine ID, if SNMPv3 version is selected.
Username Enter the SNMPv3 Username if SNMPv3 version and authentication are selected.
Security Select whether authentication and/or privacy should be used by the agent, if
SNMPv3 version and authentication are selected.
Authentication
Protocol
Select which authentication protocol should be used by the agent, if SNMPv3
version and authentication are selected.
Authentication
Password
Enter the authentication password to be used by the agent, if SNMPv3 version and
authentication are selected. Must be at least eight (8) characters.
Privacy Protocol Select the privacy encryption method to be used by the agent, if SNMPv3,
authentication and privacy are selected.
Privacy Password Enter the password to be used for privacy encryption by the agent, if SNMPv3
version, authentication and privacy are selected. Must be at least eight (8)
characters.
System Contact Specify the system contact.
System Name Update the system name, as necessary. The default system name is xSenso 2100,
xSenso 21A2 or xSenso 21R2, depending the xSenso model.
RSS Settings Description