Filter
Top Products
PAYCLOCK USER’S GUIDE
22
Mount the USB Terminal
Select a site to place the USB terminal that will be convenient to
employees clocking in and out. If you wish to increase the distance
between the USB terminal and the computer’s USB port, you may
utilize the following USB cable extenders available from the help
desk at (800) 241-4990 or from http://shop.lathem.com.
• 16 foot USB Active Extension Cable (P/N: USBCABLE16)
Connect up to four cables in succession.
• USB Super Extender (P/N: USBEXTENDER)
Extend distance up to 150’ using Cat5 cable sold separately.
Mount the TS100 or Remote Finger
Sensor
Place the TS100 or Remote Finger Sensor on a desk or table within
close range of the computer where the USB Terminal Manager
software is installed. The terminals come with a cable that is
approximately 6 feet long.
Mounting the PC50/60
Step 1: Select a site to install your PC50/60 terminal that will be
convenient to employees clocking in and out. The included USB
cable is 15 feet long.
The PC50/PC60 terminal derives its power from the USB Port of its
host computer. No other power source is required for basic
operation. The optional Wall Mount Finger Sensor requires the
addition of an AC Power Adapter. Is using the Wall Mount Finger
Sensor keep in mind that the terminal will have to be mounted in
close proximity to an AC outlet.