Filter
Top Products
Finishing110
Finishing
When the optional offset tray is installed, job separation and offset printing
can be performed. For the installation procedure, refer to “Offset Tray” on
page 214. Settings for job separation and offset printing can be specified by
selecting
JOB SEPARATION or FINISHING in PAPER MENU.
" Use the following paper for job separation and offset printing.
" Paper is fed to the sub output tray with job separation and offset print-
ing.
Job Separation Printing
When paper is fed to the sub output tray, the pages are fed out shifted as
shown below.
" To perform job separation printing, select SUB TRAY in PAPER
MENU/FINISHING
.
Media Size
Width: 89 to 216 mm (3.5 - 8.5 inch)
Length: 140 to 356 mm (5.5 - 14.0 inch)
2
1
4
3
2
1
3
2
1
3
2
1