Filter
Top Products
4. Pull the handle 1 of the hard disk drive bracket upward and then slide the hard disk drive outward to
remove it from the hard disk drive bay.
Figure16. Removing the hard disk drive
5. Flex the sides of the hard disk drive bracket properly to remove the hard disk drive out of the bracket.
6. To install the new hard disk drive into the bracket, ex the bracket and align pin 1 , pin 2 , pin 3 , and
pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure17. Installing the hard disk drive into the bracket
26 ThinkCentre User Guide