Filter
Top Products
Installing the monitor stand
Attention:
Do not open your computer or attempt any repair before reading and understanding “Important safety information”
on page v.
This section provides instructions on how to install the monitor stand.
Notes:
• The monitor stand is available only in some models. If your computer comes with the monitor stand, the
instructions on how to remove the frame stand also apply to the removal of the monitor stand.
• The frame foot illustrated in the following instructions is available only on computers that come with the
frame stand. If you remove the frame stand and install the monitor stand, do not remove the frame foot.
To install the monitor stand, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the cover is facing up.
3. If your computer is installed with a frame stand, press the release button toward the top of the computer
and lift the frame stand off the computer.
Figure11. Removing the frame stand
40 ThinkCentre M93z User Guide