Lenovo 2347G5U Tablet User Manual


 
Using the ngerprint reader
Depending on the options you ordered, your computer might have an integrated ngerprint reader. By
enrolling your ngerprint and associating it with a power-on password, a hard disk password, or both
passwords beforehand, you can start the computer, log on to the system, and enter the ThinkPad Setup by
swiping your nger over the reader, without typing a password. Thus ngerprint authentication can replace
passwords and enable simple and secure user access.
Enrolling your ngerprint
1. Turn on your computer.
2. To start Lenovo Fingerprint software, refer to “Lenovo programs” on page 15.
3. Follow the instructions on the screen to enroll your ngerprint. For details, refer to the Help for the
program.
LED behavior of the ngerprint reader
Table 4. LED behavior list_ngerprint reader
Indicator Description
Steady green
The ngerprint reader is ready to swipe.
Blinking green once
The ngerprint is being authenticated or has been
authenticated.
Blinking green
The ngerprint reader is ready to swipe in power-on
authentication state.
Blinking amber
The ngerprint could not be authenticated.
Steady amber for 15 seconds
The power-on authentication feature is disabled after
three bad ngerprint swipes.
Swiping your nger over the reader
To swipe your nger over the reader, do the following:
58 User Guide