Filter
Top Products
Table 12. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage converter (continued)
Note: Mounted number of the hard disk drive depends on the models. In models with RAID features, two hard disk
drives that have same FRU no. must be used in slot 0 ( a ) and in slot 1 ( b ).
3
4
b
a
When installing: Make sure that the HDD connector or SSD connector is attached rmly.
HDD and HDD rubber rails:
5
5
When installing: The rubber rails on the hard disk drive must be attached to the replacement drive. Otherwise the
drive cannot be installed properly.
SSD and storage converter:
6
5
1050 DIMM slot cover and DIMM
For access, remove this FRU:
72 ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual