Filter
Top Products
Table 15. Installation of the palm rest (continued)
3. Push the front side of the palm rest 4 and the areas marked 5 until it clicks into place.
4
5
5
4. Close the LCD cover and turn the computer over. Then fasten the four screws to secure the palm rest.
1070 Digitizer pen case assembly
For access, remove these FRUs in order:
• “1010 Battery pack” on page 68
• “1020 Digitizer pen” on page 69
• “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage
converter” on page 70
• “1060 Palm rest or palm rest with ngerprint reader” on page 75
78 ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual