Filter
Top Products
If you are replacing an old memory module, open the retaining clips and
remove the memory module being replaced as shown.
5. Position the memory module over the memory slot. Make sure that the notch
1 on the memory module aligns correctly with the slot key 2 on the system
board. Push the memory module straight down into the slot until the retaining
clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Completing the parts replacement” on
page 45.
Installing internal drives
This section provides instructions on how to install the internal drives.
Internal drives are devices that your computer uses to read and store data. You can
add drives to your computer to increase storage capacity and enable your
computer to read other types of media. Some of the types of drives that are
available for your computer are:
v Serial Advanced Technology Attachment (SATA) hard disk drives
v SATA optical drives, such as CD drives or DVD drives
Figure 10. Removing the memory module
Figure 11. Installing the memory module
20 User Guide