Lenovo 32605TS Laptop User Manual


 
“Inserting a ash media card” on page 44
“Removing a ash media card” on page 44
Inserting a ash media card
Attention: Before you start installing any of the following cards, touch a metal table or a grounded metal
object. This action reduces any static electricity from your body. The static electricity could damage the card.
SD card
SDHC card
SDXC card
MultiMediaCard
To insert a ash media card into the 4-in-1 media card reader slot, do the following:
1. Make sure that the card is correctly oriented.
2. Insert the card rmly into the 4-in-1 media card reader slot. The card might stop before it is completely
installed into the slot.
If the ash media card is not plug and play, do the following:
1. Go to Control Panel and click Hardware and Sound Device Manager. If you are prompted for an
administrator password or conrmation, type the password or provide conrmation.
2. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.
3. Follow the instructions on the screen.
Removing a ash media card
To remove a ash media card, do the following:
1. Click the triangular icon in the Windows notication area to show hidden icons.
2. Right-click the Safely Remove Hardware and Eject Media icon.
3. Select the corresponding item to eject the card from the Windows operating system.
4. Press the card to eject it from your computer.
5. Remove the card from your computer and store it safely for future use.
Note: If you do not remove the card from your computer after you eject the card from the Windows
operating system, the card can no longer be accessed. To access the card, you must remove it once,
then insert it again.
44 User Guide