Filter
Top Products
Loading a disc
1. Press the Eject button. The tray slides out of the drive.
2. Place a disc with the label facing up in the tray.
3. Close the tray by gently pushing the tray in until it latches.
Attention: Do not use force or insert foreign objects to open the tray. If your tray does not
open when you press the Eject button, see “Manually ejecting a disc” for more information.
Manually ejecting a disc
If you press the Eject button and the tray does not slide out, turn off the computer
and straighten a large paper clip to form a tool, as shown in the illustration. The
straightened end must extend at least 45 mm (1.8 in.). Insert the extended end into
the manual-eject hole on the front of the drive. Push the paper clip until the tray
opens. Gently pull out the tray until you can remove the disc.
45 mm
1.8 in
Using Media
Your Super Multi-Burner can use many different kinds of media. Not all media is
used in the same ways. The following sections describe what you can do with the
different media types.
Handling and caring for a disc
Carefully handle and clean discs, so that they remain readable. Be especially
careful with rewritable media types such as CD-RW, DVD+RW, and DVD-RW
discs.
v Always store discs in their original packaging.
v Always store discs out of direct sunlight.
v Always store discs away from direct heat sources.
v Remove discs from the computer when not in use.
2-2 Super Multi-Burner Ultrabay Enhanced Drive: User’s Guide