Lenovo 428742U Tablet User Manual


 
Note: The Web site address might change without notice. If the homepage is not displayed, search for it
from the Microsoft top page.
To install a x module, run the EXE le in a subfolder and follow the instructions on the screen.
Note: If you remove the hard disk drive from the computer with a single-core processor and install it on a
computer with a dual-core processor, you can get access to the hard disk drive. The opposite, however, is
not true: If you remove the hard disk drive from a computer with a dual-core processor and install it on a
computer with a single-core processor, you cannot get access to the hard disk drive.
Installing Windows Vista
Before you start, print these instructions.
Note: Your computer supports Windows Vista with the Service Pack 2. Before you install Windows Vista
Service Pack 2, make sure you install the Windows Vista Service Pack 1 rst.
To install Windows Vista and its related software on your computer, do as follows:
1. Start the ThinkPad Setup.
2. Select Startup menu.
3. Select UEFI/Legacy Boot.
4. Do one of the following:
If you want to install the Windows Vista 32–bit operating system, select Legacy Only or Both.
If you want to install the Windows Vista 64–bit operating system in Legacy mode, select Legacy Only.
If you want to install the Windows Vista 64–bit operating system in UEFI mode, select UEFI Only.
5. Press F10.
6. Insert the DVD for Windows Vista integrated with Service Pack 1 into the DVD drive, and restart the
computer.
7. Complete the installation of Windows Vista Service Pack 1 by following OS installing instructions.
8. Install the Windows Vista Service Pack 2. You can install the Windows Vista Service Pack 2 using the
Windows Vista Service Pack 2 Installation CD or download it from either Microsoft Download Center or
Microsoft Windows update Web site.
9. Install the Intel Chipset Support for Windows 2000/XP/Vista/7. To do this, refer to “Installing Intel
Chipset Support for Windows 2000/XP/Vista/7” on page 180
.
10. Install device drivers. To do this, refer to “Installing drivers and software” on page 181.
Installing Registry Patches for Windows Vista
Install the following Registry Patches:
Registry Patch enabling Device Initiated Power Management on SATA
Registry Patch enabling USB S3 Power Management
Registry patch to change IDLE IRP timing by Fingerprint reader
Registry patch enabling Wake Up on LAN from Standby for Energy Star
Registry patch to improve USB device detection on resume from sleep
Fix for Issue of HDD with HD Detection
To install these Registry Patches, go to :
http://www.lenovo.com/support
Chapter 8. Advanced conguration 175