Table 6. Cong menu items (continued)
Menu item
Submenu item Selection Comments
Power Control Beep
• Disabled
• Enabled
If this function is enabled,
a beep sounds when the
computer enters a power
management mode, when it
resumes operational mode,
and when the ac power
adapter is connected or
disconnected.
Low Battery Alarm • Disabled
• Enabled
Enable or disable the low
battery alarm.
Password Beep • Disabled
• Enabled
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will be
sounded when the entered
password matches or does
not match the congured
password.
Beep and Alarm
Keyboard Beep • Enabled
• Disabled
Enable or disable keyboard
beep when unmanageable
key combinations are
pressed.
Serial ATA (SATA) SATA Controller Mode
Option
• Compatibility
• AHCI
• RAID
Select SATA controller
operation mode. If your
system supports RAID,
select “RAID.” If you select
“Compatibility mode”,
serial SATA controller
operates in compatibility
mode.
Core Multi-Processing
• Disabled
• Enabled
Enable or disable additional
execution core units within
a CPU.
Note: If you are using a
computer with a single-core
processor, this item does
not appear.
Note: For Core
Multi-Processing, refer
to the instructions in
“Installing Windows XP” on
page 176
.
CPU
Intel Hyper-Threading
Technology
• Disabled
• Enabled
Enable or disable additional
logical processors within a
processor core.
Chapter 8. Advanced conguration 191