Lenovo 70BJ9005WW Network Hardware User Manual


 
Obtaining Alerts About Your px4-300r Network Storage
Array
You can configure your px4-300r to send email alerts when problems are detected. This is done through the
email notification feature. Email notification provides a destination for emails sent by the px4-300r when
problems are detected. To provide a destination email address, enter the following information:
Destination Email Addresses — enter a valid email address or addresses. This email address
provides a destination for messages sent by the px4-300r when problems are detected by the
system. You can add multiple email addresses by separating them with commas, spaces or
semicolons.
Check Send a test email message to confirm that email notification is working properly.
Check Configure custom SMTP settings only if your network blocks SMTP traffic, requiring
additional credentials, such as a corporate firewall.
Most users will not need to check this option. If checked, enter the following additional information
to identify your SMTP server:
Email Server (SMTP) — enter the address of your SMTP server.
Sender Email Address — enter an email address for the px4-300r to use as the From address
when it creates messages.
Email Login — enter the username used to log into the email account you entered above.
Email Password — enter the password for the email account.
Confirm Password — confirm the password for the email account. It must match the
password provided above.
If your email application uses a SPAM blocker, it is recommended that you add a sender email
address to your safe list. If you do not define additional credentials, the default sender email is:
sohostorage@emc.com
Click Apply to save your changes.
Setting up Your px4-300r Network Storage Array
Obtaining Alerts About Your px4-300r Network Storage Array 15