Filter
Top Products
Diagnostic Error Code FRU/Action
015-196-XXX USB port test halt, error threshold exceeded
1. Press F3 to review the log le.
2. Restart the test to reset the log le.
015-197-XXX USB port test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 37
.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
015-198-XXX USB port test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 37
.
2. Flash the system and re-test. See “Updating
(ashing) the BIOS” on page 157.
3. Go to “Undetermined problems” on page 65.
015-199-XXX USB port test failed, cause unknown 1. Go to “Undetermined problems” on page 65.
2. Flash the system and re-test. See “Updating
(ashing) the BIOS” on page 157.
3. Replace component under function test.
018-000-XXX PCI Card Test Passed
No action
018-0XX-XXX PCI Card Failure
1. Riser card, if installed.
2. System board
018-195-XXX PCI Card Test aborted by user 1. PCI card
2. Information only Restart the test, if necessary
018-196-XXX PCI Card test halt, error threshold exceeded
1. Press F3 to review the log le
2. Restart the test to reset the log le
018-197-XXX PCI Card test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 37
.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
018-198-XXX PCI Card test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 37.
2. Flash the system and re-test. See “Updating
(ashing) the BIOS” on page 157
.
3. Go to “Undetermined problems” on page 65.
018-199-XXX PCI Card test failed, cause unknown 1. Go to “Undetermined problems” on page 65.
2. Flash the system and re-test. See “Updating
(ashing) the BIOS” on page 157.
3. Replace component under function test.
52 ThinkStation Hardware Maintenance Manual