Filter
Top Products
Figure 8. Removing a PCI card
Notes:
a. The card ts tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
b. If the card is held in place by a retaining latch, disengage the card retaining latch in either of the
two ways illustrated, depending on the retaining latch on the PCI card slot. Grasp the card and
gently pull it out of the slot.
Figure 9. Disengaging the card retaining latch
5. Remove the new PCI card from its static-protective package.
6. Install the new card into the appropriate slot on the system board. See “Locating parts on the system
board” on page 71.
Note: If you are installing a PCI Express x16 graphics card, make sure the memory slot retaining clips
are closed before you install the graphics card.
76 ThinkStation Hardware Maintenance Manual