Filter
Top Products
• If you are installing a secondary optical drive, remove the plastic panel in the front bezel for the
drive bay you want to use. If there is a metal static shield installed in the drive bay, remove the
metal static shield.
• If you are replacing an optical drive, disconnect the signal cable and the power cable from the rear
of the optical drive, press the blue release button, and then slide the optical drive out of the front
of the computer.
Figure 16. Removing the optical drive
5. Install the optical drive retainer on the side of the new optical drive.
Figure 17. Installing the optical drive retainer
Chapter 9. Replacing FRUs 81