Filter
Top Products
9
To replace the battery
1 Turn off the computer, or enter hibernation mode. Then disconnect
the AC adapter and all cables from the computer.
Note:
If you are using a PC Card, the computer might not be able to enter
hibernation mode. If this happens, turn off the computer.
2 Close the computer display, and turn the computer over.
3 Unlock the manual battery latch . Holding the spring-loaded battery
latch in the unlocked position , remove the battery pack in the
direction shown by arrow .
1
2
3
3
2
2
1
1
N500_Service Flyer.book Page 9 Thursday, September 25, 2008 1:34 PM