Filter
Top Products
18
Note:
If only one DIMM is used on the computer you are servicing, the card must
be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot).
To make sure that the SO-DIMM is installed correctly, do as follows:
1 Turn the computer on.
2 Hold F1 key during startup, and the BIOS Setup Utility screen opens.
The “Total Memory” item shows the total amount of memory installed
in your computer.
a
b
b
a
N500_Service Flyer.book Page 18 Thursday, September 25, 2008 1:34 PM