Filter
Top Products
11
The drive is very sensitive. Incorrect handling can cause damage and
permanent loss of data on the hard disk. Before removing the hard disk
drive, make a backup copy of all the information on the hard disk, and then
turn the computer off. Never remove the drive while the system is
operating, in sleep mode, or in hibernation mode.
To replace the hard disk drive, do the following:
1 Turn off the computer; then disconnect the AC adapter and all cables
from the computer.
2 Close the computer display, and then turn the computer over.
3 Remove the battery.
4 Remove the screws that secure the hard disk drive slot cover .
Attention:
Handling a hard disk drive
Do not drop the drive or subject it to physical shocks. Put the drive
on a material, such as soft cloth, that absorbs the physical shock.
Do not apply pressure to the cover of the drive.
Do not touch the connector.
1
N500_Service Flyer.book Page 11 Thursday, September 25, 2008 1:34 PM