Filter
Top Products
16
4 Remove the battery.
5 Remove the thermal slot cover.
a. Remove the screws that secure the thermal slot cover .
b. Remove the thermal slot cover .
6 If two SO-DIMMs are already installed in the memory slot, remove one
of them to make room for the new one by pressing out on the latches
on both edges of the socket at the same time. Be sure to save the old
SO-DIMM for future use.
1
2
2
1
1
N500_Service Flyer.book Page 16 Thursday, September 25, 2008 1:34 PM