Filter
Top Products
13
7 Take out the hard disk drive secured in a metal frame.
8 Remove the screws and detach the metal frame from the hard disk
drive.
9 Attach the metal frame to a new hard disk drive; then tighten the
screws.
0 Put the hard disk drive gently into the hard disk drive bay with the tab
facing upwards and the connectors facing each other; then push it
firmly into space.
A Reinstall the cover of the hard disk drive slot.
B Reinstall the screws.
C Reinstall the battery.
D Turn the computer over again. Connect the AC adapter and the cables
to the computer.
4
N500_Service Flyer.book Page 13 Thursday, September 25, 2008 1:34 PM