Filter
Top Products
Table 26. Removal steps of base cover, USB sub card with cable, and PC Card/ExpressCard
slots (or ExpressCard/Smart Card slots or ExpressCard/7-in-1 Media Card Reader slots)
bezel assembly (continued)
Attention: Before step 8, be sure that the Serial Ultrabay Slim device or Serial
Ultrabay Enhanced device eject lever has not popped out. It must be housed in
its position as shown in the figure a.
a
b
7
8
Note: When installing the base cover, make sure that the position of the wireless
switch, and firmly fit into the frame b.
Removing and replacing a FRU 121