Conguring camera settings
You can congure the camera settings to meet your needs, such as adjusting the quality of the video output.
To congure the camera settings, do the following:
• For Windows 7: Press Fn+F6. The Communications settings window opens. Click the Manage Settings
button and congure the camera settings as desired.
• For Windows 8, do one of the following:
– Congure the camera settings directly from the program that is using the camera. For details, see the
help information system of the program.
– Click Lenovo Settings from the Start screen. Then click Camera. Follow the instructions on the
screen to congure the camera settings as desired.
Using a ash media card
Your computer has one media card reader slot.
The media card reader slot supports the following four types of cards:
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
• Secure Digital eXtended-Capacity (SDXC) card
• MultiMediaCard (MMC)
Note: While transferring data to or from a media card, such as an SD card, do not put your computer into
sleep or hibernation mode before the data transfer is complete; otherwise, your data could become damaged.
For more information about ash media cards, refer to any of the following topics:
• “Inserting a ash media card” on page 39
• “Removing a ash media card” on page 40
Inserting a ash media card
Attention: Before you start installing any of the following cards, touch a metal table or a grounded metal
object. This action reduces any static electricity from your body. The static electricity could damage the card.
• SD card
• SDHC card
• SDXC card
• MultiMediaCard
To insert a ash media card into the 4-in-1 media card reader slot, do the following:
1. Make sure that the card is correctly oriented.
2. Insert the card rmly into the 4-in-1 media card reader slot. The card might stop before it is completely
installed into the slot.
If the ash media card is not plug and play, do the following:
1. Open Control Panel.
2. Click Hardware and Sound.
Chapter 2. Using your computer 39