59
Lenovo IdeaPad Y560
Figure 14. Removal steps of keyboard bezel, speakers, power board and
volume buttons board (continued)
Pull out two antenna cables (red, black) from the guide hole of the system
board in the direction shown by arrow
7
. Release the antenna cables and the
LCD cable from the cable guides in the direction shown by arrows
8
.
7
8
8
8
8
8
When installing:
Route the antenna cables along the cable guides. As you route the cables, •
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached rmly and make sure that you •
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.