Filter
Top Products
2.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and
you would like to change your Internet connection type. The WAN Settings screen allows you to
specify the type of each WAN port connect you want to establish with your ISP. The WAN
settings offer the following selections for the router’s WAN ports, Dynamic IP, PPPoE, PPTP,
Static IP Address. You have to select one of the two WAN ports first and configure one WAN
port at a time.
Parameters Description
2.2.1 Dynamic IP address Your ISP will automatically give you an IP address
2.2.2 PPPoE Your ISP requires PPPoE connection.
2.2.3 PPTP
Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection
.
2.2.4 Static IP address Your ISP has given you an IP address already
Once you have made a selection, click <More Configuration> at the bottom of the screen and
proceed to the manual’s relevant sub-section
32