Traffic Type You can select one of the traffic types like FTP,
SMTP …etc. You also can select “CUSTOMIZED
SERVICE” to define your own service by protocol,
source port and destination port.
Protocol If you select “IP” protocol, the rule will match
packets by IP information, like source address,
destination address …etc. If you select “TCP” or
“UDP”, the rule will not only match packets by IP
information, but also session layer information, like
source port and destination port. You can enter
several ranges for source and destination port to
match.
DiffServ Type You can select one of the DiffServ type to match or
select “WILDCARD” to match all DiffServ types.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
65
