A SERVICE OF

logo

Open as PDF
next previous
Add PC
Parameters Description
Client PC Description The description for this client PC rule.
Client PC IP Addresses
Enter the IP address range that you wish to apply this
Access Control rule. This is the user’s IP address(es)
that you wish to setup an Access Control rule. You can
select a range of users simply by inputting the starting
users’ last digit (octet) IP address and the last user’s last
octet IP address in the appropriate boxes. If you want to
select only one user then input the user’s last digit IP
address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
Client PC Service You can block the clients from accessing some
Internet services by checking the services you want
to block.
Protocol This allows you to select UDP or TCP protocol type
you want to block.
51