LevelOne FBR-1700TX Network Router User Manual


 
Introduction
Reset Button
When pressed and released, the FBR-1700TX will
reboot (restart).
This button can also be used to clear ALL data
and restore ALL settings to the factory default
values.
To restore the factory default values:
Power Off
Hold the Reset Button down while you Power
On.
Continue holding the Reset Button until the
Status (Red) LED blinks TWICE.
Release the Reset Button.
The factory default configuration has now
been restored, and theFBR-1700TX is ready
for use.
DIP switches
Refer to the following table.
Printer Port
Standard parallel printer port. If you wish to share
a printer, connect it here.
7