Filter
Top Products
PC Configuration
Macintosh Configuration
The FBR-1700TX currently does not support printing from the Macintosh,
but you can access the Internet via the FBR-1700TX. The procedure is as
follows.
1. Open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via pop-up menu.
3. Select Using DHCP Server from the Configure pop-up menu. The DHCP
Client ID field can be left blank.
4. Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the only
change required is to set the Router Address field to the FBR-1700TX's
IP Address.
47