Filter
Top Products
80
A
Appendix A
Troubleshooting
This Appendix covers the most likely problems and their so-
lutions.
Overview
This chapter covers some common problems that may be encountered while
using the FBR-1700TX and some possible solutions to them. If you follow
the suggested steps and the FBR-1700TX still does not function properly,
contact your dealer for further advice.
General Problems
Problem 1:
Can't connect to the FBR-1700TX to configure it.
Solution 1:
Check the following:
• The FBR-1700TX is properly installed, LAN connec-
tions are OK, and it is powered ON.
• Ensure that your PC and the FBR-1700TX are on the
same network segment. (If you don't have a router, this
must be the case.)
• Ensure that your PC is using an IP Address within the
range 192.168.0.2 to 192.168.0.254 and thus compati-
ble with the FBR-1700TX's default IP Address of
192.168.0.1.
Also, the Network Mask should be set to
255.255.255.0 to match the FBR-1700TX.
In Windows, you can check these settings by using
Control Panel-Network to check the Properties for the
TCP/IP protocol.