Filter
Top Products
Configuration
Data - LAN Port Screen
Internal LAN
Device IP
Address
IP address for the FBR-1700TX. Use the default value
of 192.168.0.1 unless the address is already in use or
your LAN is using a different IP address range. In the
latter case, enter an unused IP Address from within the
range used by your LAN.
Network Mask
The default value 255.255.255.0 is standard for small
(class "C") networks. For other networks, use the
Network Mask for the LAN segment to which the FBR-
1700TX is attached. i.e. the same value as the PCs on
that LAN segment.
DHCP Server
Operation
If Enabled, the FBR-1700TX will allocate IP Ad-
dresses to PCs on your LAN. The default and
recommended value is Enabled.
If you are already using a DHCP Server, this setting
must be DISABLED, and the existing DHCP server
must be re-configured. See Chapter 5 for further
details.
Start IP Ad-
dress
Finish IP
Address
The Start IP Address and Finish IP Address fields set
the values used by the DHCP server.
This range also determines the number of DHCP clients
supported. (Maximum 253.)
19