LevelOne FNS-7000 Network Card User Manual


 
35
System Setting Function
z Enter System Setting
1. Press the switch A for two seconds to enter System Setting.
2. Press the switch B for selection options.
3. Press the switch A to enter the selection options.
z NETWORK SETTINGS
Enter the Network Setting, press the switch B to choose DHCP or Static IP.
1. Obtain IP Address Automatically (DHCP)
DHCP will automatically obtain IP address settings.
2. Specify Static IP Address (STATIC IP)
press the switch A to select STATIC IP and complete the following steps:
SET STATIC IP
Press the switch B to set the IP address settings (press the switch B to select the
number 0~25)/ Press the switch A for the next number.
SET NETMASK
Follow the same procedure as above.
SET GATEWAY
Follow the same procedure as above.
SELECT STATIC IP
Press the switch B to select YES or NO and confirm by pressing the switch
A.NO will return to the Network Settings menu.
RESTART SYSTEM
You need to restart the system to make changes effective. Press the switch B to
select YES or NO and press the switch A to confirm.
z POWER DOWN
Press the switch A to shutdown the system.
z REBOOT SYSTEM
Press the switch A to reboot the system.
z EXIT
Press the switch A to exit the settings menu.