Filter
Top Products
126
9.4 Modify Setting Values – “set” Command
“set” command is used to modify the setting values of this printer
server. The format of “set” command is as following:
set argument_name value
Then the value will be written into the system configuration. For
example, if you want to set IP address of the printer server to
192.168.2.2, type “set ip 192.168.2.2” command and the IP of the printer
server will be changed. After the setting is finished, please reboot the
printer server.
admin# set ip 192.168.2.2
admin# reboot
If you enter only “set”, the system will list all arguments of “set”
command and the command format.
The following table lists all the arguments whose value can be
modified by “set” command:
Argument
Description
Example
psname
Printer server name
set psname PS001
password
Login password
set password 1234
username
Login username
set username admin
wlfunc
Enable or disable the wireless
LAN function.
The value should be “disabled”,
“enabled” or “auto”
set wlfunc auto
wlmode
Wireless LAN mode is
Infrastructure or Ad Hoc.
The value should be “inf” or “ad
hoc”
set wlmode ad hoc
ESSID
ESSID of the wireless LAN
set ESSID default
Argument
Description
Example
channel
Channel number used by wireless
LAN.
The value should be 1~14.
set channel 11
wep
The mode of WEP.
The value should be “disable”,
“wep64” or “wep128”
set wep disable
defkey
Default WEP key number.
The value should be 0~3.
0: key 1
1: key 2
set defkey 0