Filter
Top Products
48
5.2 NetWare 3.x/4.x/5.x Installation & Setup
Once your printer server is connected to your Ethernet network, you
can set it up for use with your networking software.
5.2.1 Installation Using PCONSOLE
5.2.1.1 Configuring as Printer server Mode
1. Run the NetWare PCONSOLE program.
2. Change the current file server, if necessary, using the Change
Current File Server menu selection.
3. Choose the Print Queue Information menu selection.
4. Press the Insert key to add a new print queue.
5. Type in a print queue name, such as “PQ” or “Q1”.
6. You have now successfully created the print queue that your
printer server will serve. Press the Escape key until the
Available Options main menu is displayed.
7. Select Printer server Information.