Filter
Top Products
50
BSSID
Add Bridge 2's BSSID Add Bridge 1's and Bridge
3's BSSID
Add Bridge 2's BSSID
Wireless Configuration –
Bridging Encryption
Select appropriate key
type/length and enter key
value. Must be the same as
that on the other 2 Bridges.
Select appropriate key
type/length and enter key
value. Must be the same as
that on the other 2
Bridges.
Select appropriate key
type/length and enter
key value. Must be the
same as that on the
other 2 Bridges.
With this configuration, each bridge can control a wireless LAN. All wireless clients must
have the same SSID as the bridges on the AP card (as set in the Wireless Configuration—
General screen. All clients can roam between the three bridges.
All other setup screens should be completed following the guidelines in Chapter 3.