Filter
Top Products
PC Configuration
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the WBR-3407's Access Point,
regardless of the operating system which is used on the client.
To use the WBR3407 in the WBR-3407, each Wireless Station must have compatible settings,
as follows:
Mode
The mode must be set to Infrastructure (rather than Ad-hoc)
Access points only operate in Infrastructure mode.
SSID (ESSID)
This must match the value used on the WBR-3407. The default value is
wireless.
Note! The SSID is case sensitive.
Wireless
Security
By default, Wireless security on the WBR-3407 is disabled.
• If WEP or WPA-PSK is enabled on the WBR-3407, each station
must use the same settings as the WBR-3407.
• If WPA-802.1x is enabled, each station must obtain a cerrtificate for
authentication. See the following section for details.
35