LevelOne WBR-3407 Network Router User Manual


 
WBR-3407 User Guide
Data - Status Screen
Internet
Modem Status
This indicates the status of the ADSL modem component.
DownStream
Connection Speed
If connected, displays the speed for the DownStream (download)
ADSL Connection.
UpStream
Connection Speed
If connected, displays the speed for the UpStream (upload) ADSL
Connection.
Connection Method
This indicates the current connection method, as set in the Setup
Wizard.
Internet Connection
This indicates the current status of the Internet Connection
Active - Connection exists
Idle - No current connection, but no error has been detected.
This condition normally arises when an idle connection is
automatically terminated.
Failed - The connection was terminated abnormally. This
could be caused by Modem failure, or the loss of the
connection to the ISP's server.
If there is an error, you can click the "Connection Details" button
to find out more information.
Internet IP Address
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
Connection Details
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
LAN
IP Address
The IP Address of the WBR-3407.
Network Mask
The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server
This shows the status of the DHCP Server function. The value
will be "Enabled" or "Disabled".
MAC Address
This shows the MAC Address for the WBR-3407, as seen on the
LAN interface.
Wireless
Name (SSID)
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
Region
The current region, as set on the Wireless screen.
Channel
This shows the Channel currently used, as set on the Wireless
screen.
Wireless AP
This indicates whether or not the WBR3407 feature is enabled.
Broadcast Name
This indicates whether or not the SSID is Broadcast. This setting
is on the Wireless screen.
54