Filter
Top Products
Advanced Administration
Figure 74: Routing Screen
Data - Routing Screen
RIP
RIP Direction
Select the desired RIP Direction.
RIP Version
Choose the RIP Version for the Server.
Static Routing
Static Routing
Table Entries
This list shows all entries in the Routing Table.
• This area shows details of the selected item in the list.
• Change any the properties as required, then click the "Edit"
button to save the changes to the selected entry.
Buttons
Add
Add a new entry to the Static Routing table, using the data shown in
the "Properties" area on screen. The entry selected in the list is
ignored, and has no effect.
Edit
Update the current Static Routing Table entry, using the data shown
in the table area on screen.
Delete
Delete the current Static Routing Table entry.
Save
Save the RIP setting. This has no effect on the Static Routing Table.
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to the WBR-3407,
so that they can be forwarded to the external LAN, WAN, or Internet. To achieve this, the
local LAN must be configured to use the WBR-3407 as the Default Route or Default Gateway.
Local Router
The local router is the Router installed on the same LAN segment as the WBR-3407. This
router requires that the Default Route is the WBR-3407 itself. Typically, routers have a special
entry for the Default Route. It should be configured as follows.
87