![](http://pdfasset.owneriq.net/f/04/f0440774-f2e3-4ffb-ad3f-426549824e91/f0440774-f2e3-4ffb-ad3f-426549824e91-bg19.png)
3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board.
1 Plastic pins
2 Metal pins
4 Push the card firmly into place.
Notes:
• The entire length of the connector on the card must touch and be flush against the system board.
• Be careful not to damage the connectors.
Additional printer setup 25