Filter
Top Products
Load <src> with <x>
<src> is a tray or feeder, and <x> is a paper type or size.
Try one or more of the following:
• Load the specified paper in the tray.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
• Cancel the current job.
Load manual feeder with <x>
<x> is a paper type or size.
Try one or more of the following:
• Load the specified paper in the multipurpose feeder.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot
find a tray with the correct paper type and size, then it prints from the default source.
• Cancel the current job.
Load staples
Try one or more of the following:
• Replace the specified staple cartridge in the finisher.
• Touch Continue to clear the message and continue printing.
• Touch Cancel job to cancel the print job.
Memory full, cannot print faxes
There is not enough memory to print the fax job.
Touch Continue to clear the message without printing. Held faxes will attempt to print after the printer has been
restarted.
Network/Network <x>
The printer is connected to the network.
Network indicates that the printer is using the standard network port built into the printer system board. Network
<x> indicates that an internal print server is installed inside the printer or that the printer is connected to an external
print server.
No analog phone line connected to modem, fax is disabled.
The printer is not detecting an analog phone line, so the fax is disabled. Connect the printer to an analog phone line.
Understanding printer messages
238