Lexmark 16M1844 Printer User Manual


 
Setting up the printer to fax
Note: Fax capabilities may not be available on all printer models.
The following connection methods may not be applicable in all countries or regions.
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product
or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning
storm.
Choosing a fax connection
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem.
Note: The printer is an analog device that works best when directly connected to the wall jack. Other devices (such
as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the
setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is
required.
You do not need to attach the printer to a computer, but you do need to connect it to a telephone line to send and
receive faxes.
You can connect the printer to other equipment. See the following table to determine the best way to set up the
printer.
Equipment Benefits
The printer
A telephone cord
Send and receive faxes without using a computer.
The printer
A telephone
Two telephone cords
Use the fax line as a normal telephone line.
Send and receive faxes without using a computer.
The printer
A telephone
An answering machine
Three telephone cords
Receive both incoming voice messages and faxes.
The printer
A telephone
A computer modem
Three telephone cords
Send faxes using the computer or the printer.
Additional printer setup
60