Filter
Top Products
Setting the date and time
You can set the date and time so that they are printed on every fax you send. If there is a power failure, then you may
have to reset the date and time. To set the date and time:
1 Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2 Click Links & Index.
3 Click Set Date and Time.
4 Click inside the Manually Set Date & Time box, and then enter the current date and time.
5 Click Submit.
Turning Daylight Saving Time on
The printer can be set to automatically adjust for Daylight Saving Time (DST):
1 Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2 Click Links & Index.
3 Click Set Date and Time.
4 Select Automatically Observe DST.
5 Click Submit.
Additional printer setup
70