Filter
Top Products
3
2
1
4 Flex the sheets back and forth to loosen them. Do not fold or crease
the paper. Straighten the edges on a level surface.
5 Load the paper stack with the recommended print side faceup.
Notes:
• Place the print side facedown for duplex printing.
• Place pre-punched paper with the holes toward the front of
the tray.
• Place letterheads faceup with the header on the left side of
the tray.
• Place letterheads facedown with the header on the right side
of the tray for duplex printing.
• Make sure the paper is below the maximum fill line located
on the edge of the paper tray. Overloading the tray can
cause paper jams and possible printer damage.
6 Insert the tray.
7 From the printer control panel, verify the Paper Size and Paper Type
for the tray based on the paper you loaded.
Loading the 2000‑sheet high‑capacity
feeder
The high‑capacity feeder can hold up to 2,000 sheets of A4‑, letter‑, or
legal‑size paper (80 g/m
2
or 20 lb).
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each paper drawer or tray
separately. Keep all other drawers or trays closed until
needed.
1 Pull the tray out.
2 Adjust the width guide as necessary.
1
2
6