Filter
Top Products
4-18 Service Manual
4413-XXX
Carrier assembly with belt removal
1. Remove the top cover assembly. See “Top cover assembly
removal” on page 4-5.
2. Remove print engine. See “Print engine removal” on
page 4-16.
3. Depress the belt tensioner (A) until tension is released.
4. Remove the belt (B) from the carrier motor.
5. Remove two carrier shaft retainer springs (C) that secure the
shaft.
6. Disconnect carrier cables from the system board.
7. Remove the carrier shaft.
8. Remove the carrier assembly.
Note: Position of encoder strip.