Lexmark 854e MFP All in One Printer User Manual


 
Announcing Lexmark X854e MFP 10
Envelopes with excessive curl or twist exceeding
0.12 in. (6 mm), stuc
k together, with bent corners
ing envelopes should not be used:
perforations,
age
n
sed position
sulf is
) the
eal during printing.
Tra
Use letter or A4-size sheets only.
specifically designed for xerographic
d with
Lab
d be selected using guidelines found in the
res
inisher
ailable for the Lexmark
. It has two output bins with bin full and
acity: 5,000 staples
Sensing: Yes – with approximately 20
aining
Staple-out Sensing: Yes
r).
Hole Punching
A4 size: Standard 2/4-hole punch
ll sensing: Yes
full
or bin 2
Off
Offs bin
printer standard bin is 1.18 in. (13 mm)
Universal size media output is not supported
output bin capacity
set and not
rencies,
/m ), A4/letter, plain paper
.
200
The eder provides one
lb.)
5 or Executive
d executive
Note requires the “SIZE
configuration
The L X854e is shipped with the duplex option.
pport card stock, transparencies,
n requires the MFP be assigned to
Lexmark Document Portal Server v3.2 or later. The
or nicked edges or those that interlock should not
be used.
Minimum weight: 20 lb. (75 g/m
2
)
The follow
¾ Envelopes with windows, holes,
cutouts, deep embossing or package dam
¾ Envelopes with metal clasps, string ties or
metal folding bars
¾ Envelopes with exposed flap adhesive whe
the flap is in the clo
For best results, printing on new 90 g/m
2
(24 lb.)
ite or 25% cotton bond envelopes
recommended.
Under high humidity conditions (over 60%
envelopes may s
nsparencies
Transparencies
copy machines or laser printers may be use
the Lexmark X854e MFP.
els
Labels shoul
User's Gu
ide or the Cardstock and Label Guide, and
tested for acceptability.
Options and Featu
F
An optional finishing option is av
X854e MFP
empty sensing and supports stapling, hole punching and
offset stacking. The Finisher is designed for customer
setup and attaches to the right side of the printer. There
are two orderable part numbers, Finisher 2/3-hole and
Finisher 2/4-hole. Power is supplied from the printer
power supply therefore no separate external power
source is required. Total output capacity is 3,800
sheets: Standard output: 300 sheets, Bin 1 is 500
sheets and Bin 2 is 3000 sheets (unstapled,
20lb/75g/m
2
, A4/Letter, plain paper).
Stapling
Staple Cap
Staple-low
staples rem
Maximum Packet Size: 50 sheets (20 lb. (75g/m
2
),
A4/letter, plain pape
Staple Output Bin: Finishe
r bin 2 only
Letter size: Standard 2/3-hole punch
Collector box fu
Maximum packet size: Until the bin is
1
Hole punch output bin: Finisher bin
set Stacking
et bin output: Finisher bin 2 or printer standard
Offset stacking in the
Finisher Limitations
Maximum paper size 11.7 in. x 17 in.
Stapling may reduce
The hole punch configuration is factory
user or field configurable
The hole punch does not support transpa
labels or card stock
Card stock up to 90 lb.
Printer standard bin capacity is reduced to 300
sheets of 20 lb. (75 g
2
with the finisher installed
0-Sheet High Capacity Feeder
optional High Capacity Fe
additional input tray
Capacity: 2,000 sheets plain paper (20
Media types supported: plain paper
Minimum size: B
Maximum size: A4 or letter
Automatic size sensing: B5, letter an
: Auto size sensing for B5 and executive
in the printer
SENSING” setting to be changed
menu.
Standard Duplex
exmark
The duplex does not su
labels or envelopes.
Forms
The Forms applicatio
a
LEX05-250 Lexmark Confidential Until Announce