Lexmark S410 All in One Printer User Manual


 
Use To
12 Color
Switch to color mode.
13 Black
Switch to blackandwhite mode.
14 Start
Start a job, depending on which mode is selected.
15 Cancel
Cancel a print, copy, scan, or fax job in progress.
Clear current settings or error messages, and return to previous settings.
16 WiFi indicator
Check the wireless status of your printer.
17 EcoMode
Change to Sleep mode after the printer is left idle for 10 minutes.
Reduce the screen brightness.
Using flash drives
Supported file types
.jpg, .jpeg, .jpe (Joint Photographic Experts Group)
.tiff, .tif (Tagged Image File Format)
Using a flash drive with the printer
Make sure the flash drive contains files that are supported by the printer. For more information, see
“Supported file types” on page 16.
1 Insert a flash drive into the USB port.
FLASH
DRIVE
Notes:
The flash drive uses the same port that is used for a PictBridge camera cable.
An adapter may be necessary if your flash drive does not fit directly into the port.
Warning—Potential Damage: Do not touch any cables,
any network adapter, any connector, the memory
device, or the printer in the areas shown while actively
printing, reading, or writing from the memory device. A
loss of data can occur.
2 Follow the instructions or select from available options on the printer display.
Note: If the printer does not recognize the memory device, then remove and reinsert it.
About your printer 16