Filter
Top Products
Menu item Description
Mac Binary PS
On
Off
Auto
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
• Auto is the factory default setting.
• The Off setting filters print jobs using the standard protocol.
• The On setting processes raw binary PostScript print jobs.
Std Network Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
LexLink
Net <x> Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLink
For descriptions and settings of the network setup menus, see the following:
• “Network Reports menu” on page 168
• “Network Card menu” on page 168
• “TCP/IP menu” on page 169
• “IPv6 menu” on page 170
• “Wireless menu” on page 171
• “AppleTalk menu” on page 171
• “NetWare menu” on page 172
• “LexLink menu” on page 172
Note: The Wireless menu appears only when the printer is connected to a
wireless network.
SMTP Setup menu
Use the following menu to configure the SMTP server.
Menu item Description
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
Specifies SMTP server port information
Note: 25 is the default SMTP gateway port.
SMTP Timeout
5–30
Specifies the amount of time in seconds before the server stops trying
to send the e-mail
Note: 30 seconds is the factory default setting.
Reply Address
Use SSL
Disabled
Negotiate
Required
Specifies server information. This is a required item.
Notes:
• The message box has a limitation of 512 characters.
• Disabled is the factory default setting for Use SSL.
Understanding printer menus
167